0
0
You can quickly broaden the scope of If you want to extend the range of your current wireless network wherever you are, use a Victony WiFi AC1200 Extender Setup. Your current network is strengthened and enhanced by the placement of four antennas in an original, patented omnidirectional arrangement. Your wireless network’s capacity will gradually be increased by the victony AC1200 dual-band wireless range extender. It offers a very practical, simple implementation, and minimal footprint. Additionally, its magnificent form will blend in beautifully with the furnishings in your home or place of business.
Victony wifi ac1200 extender configuration through wps button
To use a browser to connect to the Victony AC1200 extender, adhere to following steps:
- You must plug your AC1200 Range Extender into an outlet.
- Now, repeater mode on your extension is required.
- Go to your PC or smartphone’s WiFi settings.
- In a similar manner, look for and join the Victory-N network.
- After connecting to the extender network, open any web browser, such as Mozilla Firefox, Google Chrome, etc.
- Also enter 192.168.10.1 in the address bar.
- Right now, we are on the Victory AC1200 configuration page.
Note: If you need help setting up your victony WiFi extender, get in touch with our expert or visit the official website, ap.setup.
Victony wifi ac1200 extender setup via wps button
- Connect the victony AC1200 to the power source.
- Watch for the extender’s solid blue light to turn on, indicating that it is switched on and on.
- Keep an eye out for the extender’s solid blue light to turn on, which will show that it is turned on.
- At this point, press the WPS button on the extension.
- As long as the extender’s LED is flashing, do not unplug the AC1200.
- The Victory AC1200 setup with WPS is now complete.
- The power, client, device, and WPS indicators on the WiFi repeater will all go to olid green.
- Where the current weak signals are, install the victony extension. also achieve reliable WiFi connectivity.
Victony ac1200 extender setup via manual method
The installation process for this extender is really straightforward and offers more than three choices.We’ll now have a look at the entire setup process for the victony AC1200 WiFi Extender with AP.setup.
- Join the power converter to an outlet nearby.
- Verify that all cables have the appropriate insulation..
- To make sure the extender is turned on, look for a blue light on it.
- Now you have to link the router and the extension.
- Press the WPS buttons on your extension and router at the same time to do this.
- If you don’t connect the devices within two minutes, they won’t.
- Again, the signal LED is a steady blue colour.
- This indicates that the connection between the two devices was successful.
- The following step in setting your victony ac1200 can now be seen.
- Once identified, the extender will help the network become stronger.
Setup for victony AC1200 Firmware Update
The victony AC1200 range extender is a high-performing device, however when its firmware needs to be changed, it operates poorly. Your victony device’s firmware, as you understand it, is a piece of software that controls every function of the hardware and is embedded into it. It indicates that you must install any new firmware that the manufacturer publishes for the extender in order to retain the extender’s peak performance. The victony AC1200 extender has a firmware update available, though. No? After that, read this article to learn how to use the victony setup wizard to upgrade the extender’s firmware.
- In your browser, look for ap.setup.
- Visit the configuration page for the victony extender.
- Enter the model number of your extender to get the latest victony range extender firmware.
- Next, click on the victony extender firmware to choose the most recent version.
- Following the instructions on the screen, update it at the end.
