0
0
Why Water Treatment is Essential for Your Outdoor Boiler
Have you ever wondered why outdoor wood furnace water treatment is needed? If you own an outdoor wood boiler, it must be esteemed for the value that it provides to heating operations. However, inadequate maintenance is detrimental, as corrosion and scale buildup when left unattended can significantly reduce the heating appliance’s lifespan. The maintenance secret? High-quality water treatment products such as Certified Liquid Armor Water Treatment.
Water is very important in any outdoor boiler system. But not all waters are created equal, and untreated water will slowly and surely cause irreversible damage over time. Knowing about water quality and taking preventive measures with Certified Liquid Armor will help you avoid major problems, improve efficiency, and ensure that your system runs smoothly for countless years.
What Happens When You Don’t Treat Your Outdoor Boiler Water?
Water quality determines the efficiency and lifespan of your outdoor boiler. Here are a few common problems that cause family trouble by ignoring the treatment of water:
- Corrosion – Untreated waters that receive oxygen and minerals undergo rusting by eating up metal components resulting in leakages and structural weakness.
- Scale Build Up – Some minerals like calcium and magnesium build inside the boiler affecting the heat transfer processes, causing an increase in energy costs.
- Bacteria and Impurities Biog Uncharge – Bacteria, organic material, and other impurities can bring sludge formation, leading to clogging in the system, lowering efficiency.
- Boiler Failure– Improper treatment causes leaks, embolism, heat cross-transfer inefficacies, and total breakdowns of external boilers which result in very expensive repairs or replacements.
These problems don’t just affect the boiler itself; they also increase fuel consumption and operational costs, meaning you’ll spend more money to get the same level of heating.
How Certified Liquid Armor Water Treatment Protects Your Boiler
Certified Liquid Armor Water Treatment is specifically formulated to protect outdoor wood boilers. But how does it work?
Prevention of Corrosion
This treatment neutralizes corrosive agents, allowing a protective film on the metal surfaces inside the boiler and slowing the development of rust and enhancing the life of components.
Prevention of Scaling
It softens the water and inhibits mineral deposition to keep clean heat exchangers for efficient heat transfer, thus preventing energy from being wasted.
Prevention of Bacterial Growth
This causes even more contaminated water quality too. It keeps your water quality clean and prevents sludge and foul odors from growing in the system.
Increase Efficiency
Clean water maintains the average temperature with balanced pH levels, allowing the boiler to work at peak performance and minimizing overheating or incomplete combustion.
Improved Life of Equipment
Regular treatment keeps the equipment from premature degradation, thus saving you repair capabilities and untimely system replacement options.
Adding Certified Liquid Armor to your boiler treatment becomes a simple step that, if done, can help save thousands of dollars on repairs and replacement.
What Type of Water Should You Use in Your Outdoor Boiler?
Before adding any treatment, you must ensure that your water source is suitable for an outdoor furnace. Not all water is the same, and some types can do more harm than good.
- Hard Water-It has a high concentration of calcium and magnesium, which cause scale deposits and lower efficiency.
- Soft Water-It is poor in minerals but can be corrosive in nature unless treated properly.
- Well Water-It may have iron, sulfur, or other impurities that start corroding and clogging the system.
When in doubt concerning water quality, you should be testing the water before any treatment is done. Most manufacturers prefer water with low mineral content and a neutral pH level in order to guarantee best boiler performance. In this regard, Outdoor Boiler provides free water testing services to determine the best treatment protocol.
How to Properly Treat Your Boiler Water
Wondering how to properly add Certified Liquid Armor to your outdoor boiler? Follow these simple steps:
- Water First Test – Any treatment would be first unnecessary if you did not understand the actual state of your water. Use their free services for testing to make sure that you are accurate about the current condition of your water.
- Calculate the Specific Dosage – By the results of your water test and the size, your manufacturer will have known how to dose Certified Liquid Armor.
- Mix the Add Treatment – Pour the treatment solution directly to the water system of the boiler, making sure that it is evenly distributed.
- Frequency Checks – Test your water as often as possible to ensure the optimal treatment levels. Routine checks catch the problem before they become expensive ones.
- Flush and Refill as Needed – It might be necessary to flush a water treatment and replace it from time to time due to suspension of impurities.
By following the above steps, you are ensuring that your outdoor boiler is in the best working condition to give you dependable heat without breakdowns at inopportune moments.
Conclusion
Neglecting water treatment could lead to expensive repairs, inefficiency, and complete system failure. The water quality is vital for the successful operation of your boiler. Therefore, giving your outdoor boiler good care would enhance its reliability within its lifespan and even further.
Why use Certified Liquid Armor Water Treatment for treating your water? The product will give you extra efficiencies and longevity by not only relieving corrosion and scaling but also dealing with bacteria. A good little bit of money spent on regular water treatment could save you thousands from damages down the road. Treating the water can significantly extend the life of your system by several years.
Free water testing is available from Outdoor Boiler if you are uncertain about the current quality of your water. The testing would enable you to receive expert opinion on your boiler’s requirements. For more detailed maintenance suggestions on your outdoor boiler, contact us and our team of experts will help you answer all of your questions.
Don’t wait until something is wrong! Treat your boiler water today and enjoy carefree heating for years!
Common Questions About Outdoor Boiler Water Treatment1. How often should I treat my boiler water?
According to advice, the water should be tested and treated at least yearly. If the water source has a high mineral content, treatments would need to occur more frequently.
2. Can I use antifreeze instead of water treatment?
Antifreeze may protect from freezing, but it does not provide certified-level corrosion and scale prevention like Certified Liquid Armor Water Treatment. If you are using antifreeze, make sure it is compatible with your boiler system and that appropriate inhibitors are used.
3. How do I know if my outdoor boiler water is properly treated?
The best way to ensure your treatment levels are optimal is to test this regularly for water. You can use the free water testing services of some organisations so that you can have the analysis done professionally for you.
4. Is Certified Liquid Armor safe for all outdoor boiler models?
Yes, it is! This particular treatment is projected to be compatible to most outdoor systems. However, the adherence to your manufacturer’s guidelines is important.
5. What happens if I don’t treat my outdoor boiler water?
Neglecting water treatment causes corrosion, scale deposits, bacteria, reduced efficiency, and premature failure of systems. Hence, regular treatment is highly essential for an efficient and long life of the boiler system.
